Posted on: November 27, 2022 Posted by: Russell Turman Comments: 0

Damage from water can be an enormous problem because it can significantly alter the state of your furniture or home. If you take care, your possessions and your house could be permanently protected. In addition, it can result in mold growth and significantly impact your property’s quality of air, posing a danger to the health of inhabitants.

Things that have been harmed through water generally cannot be fixed quickly. This is because as time passes, they naturally weaken, grow more fragile, and become more susceptible to further harm from weather and bacteria. There is, however, the possibility of a simple and secure repair of damages caused by moisture to the wood.

Restoring Wood Furniture from Water Damage

When you learn how to repair the damage caused by water to wooden furniture, You can save your treasured belongings and, in some instances, avoid spending money on replacements. Rapid response and everyday items can make your furniture last for years. If you’re looking for tips on conserving your furniture after it’s been damaged due to water, continue reading.

1. Dry Your Furniture

The swelling of water-damaged furniture can often be reduced by letting it dry. Dry the furniture as soon as possible. Exposure to the sun is the preferred method of drying wood. But after using this method, you will need to turn the wood over. The prolonged exposure to sunlight may cause the wood to reduce in size, break, and even warp.

Another method to keep wood from drying is using electric fans. Place the furniture in an area with good air circulation for at least 24 hours.

If you’re searching for a property restoration firm, you can type in “water removal in Coconut Grove” in your search bar for the best results in your area.

2. Use an Iron or Hair Dryer

To dry wet wood, make use of an iron. Place a clean towel on the area of concern and then ironing it at the lowest setting will do the trick. For the best results, you should apply the heat for 15 minutes or until the absorbent fabric begins to dry out. Make sure the iron is moving to prevent burning.

Another alternative to iron is a hair dryer set to its lowest heat setting. Be sure to maintain a safe separation (about six inches) from the wood’s surface and then shift it around so it remains cool at any time. Continue this process until there aren’t any more water bubbles and the wood is dry.

A damage removal company can also address the problem and restore it to its original state. You can contact them and avail of their services right away.

3. Remove Water Bubbles

Water bubbles on the wood’s surface can be removed using a printer or needle. The water can be released off the bubble by simply pushing a needle or paper.

Making holes in the water bubbles will help release water and air trapped within the furniture that is swollen. Keep doing this till the furniture is completely dry, and there are no more bubbles. It’s a straightforward approach to removing water bubbles without harming the wood.

4. Sand and Finish

You can sand and finish the furniture that is swelling after it is dry. Ensure you wear protective gear to avoid injuries, such as safety glasses, gloves, and a mask. It is possible to reduce the swelling using coarse sandpaper if the wood is not entirely swollen. Sanding too often can create rough surfaces.

Then, sand the whole furniture piece using more fine grit and sandpaper. When you do this, rough spots within the wood are removed, and the wood can be prepared for the final sanding. After sanding is completed, you’ll have the option of sealing or painting the wood.

5. Flatten the Wood

When the wood is dry and dry, you can use a wood flattening tool to remove any remaining water damage. This will help restore the wood to its original condition and guard against future tears and wear. Wear safety glasses, gloves, and an eye mask to avoid injury.